Adherence to protective mechanical ventilation in COVID-19 versus non-COVID-19-associated acute respiratory distress syndrome: Comparison between two prospective cohorts / Adhesión a la ventilación mecánica protectora en el síndrome de dificultad respiratoria aguda asociado a COVID-19 o asociado a otras etiologias: comparación entre dos cohortes prospectivas

Objective To compare adherence to protective mechanical ventilation (MV) parametersin patients with acute respiratory distress syndrome (ARDS) caused by COVID-19 with patients with ARDS from other etiologies. Design Multiple prospective cohort study. Setting: Two Brazilian cohorts of ARDS patients were evaluated. One with COVID-19 patients admitted to two Brazilian intensive care units (ICUs) in 2020 and 2021 (C-ARDS, n=282), the other with ARDS-patients from other etiologies admitted to 37 Brazilian ICUs in 2016 (NC-ARDS, n=120). Patients: ARDS patients under MV. Interventions: None. Main variables of interest: Adherence to protective MV (tidal volume ≤8mL/kg PBW; plateau pressure ≤30cmH2O; and driving pressure ≤15cmH2O), adherence to each individual component of the protective MV, and the association between protective MV and mortality. Results Adherence to protective MV was higher in C-ARDS than in NC-ARDS patients (65.8% vs. 50.0%, p=0.005), mainly due to a higher adherence to driving pressure ≤15cmH2O (75.0% vs. 62.4%, p=0.02). Multivariable logistic regression showed that the C-ARDS cohort was independently associated with adherence to protective MV. Among the components of the protective MV, only limiting driving pressure was independently associated with lower ICU mortality. Conclusions Higher adherence to protective MV in patients with C-ARDS was secondary to higher adherence to limiting driving pressure. Additionally, lower driving pressure was independently associated with lower ICU mortality, which suggests that limiting exposure to driving pressure may improve survival in these patients (AU)

Objetivo Comparar la adhesión a la ventilación mecánica (VM) protectora en pacientes con síndrome de dificultad respiratoria aguda (SDRA) causada por COVID-19 con pacientes con SDRA de otras etiologías. Diseño Estudio de cohorte prospectivo. Âmbito: Se evaluaron dos cohortes de pacientes con SDRA: 1.pacientes con COVID-19 ingresados en dos unidades de cuidados intensivos (UCI) brasileñas en 2020 y 2021 (C-ARDS, n=282); 2.pacientes con SDRA de otras etiologías ingresados en 37 UCI brasileñas en 2016 (NC-ARDS, n=120). Pacientes: Pacientes con SDRA bajo VM invasiva. Intervenciones: No. Variables de interés principals: Adhesión a la VM protectora (volumen tidal ≤8mL/kg; presión de meseta ≤30cmH2O; y presión de distensión [PD] ≤15cmH2O), adhesión a cada componente individual de la VM protectora, y la asociación entre la VM protectora y la mortalidad. Resultados La adhesión a la VM protectora fue mayor en la cohorte C-ARDS que en la NC-ARDS (65,8% vs. 50,0%, p=0,005), principalmente debido a mayor adhesión a la PD≤15cmH2O (75,0% vs. 62,4%, p=0,02). La regresión logística multivariable mostró que la cohorte C-ARDS se asoció de forma independiente con la adhesión a la VM protectora. Entre los componentes de la VM protectora, sólo la limitación de la PD se asoció de forma independiente con menor mortalidad en la UCI. Conclusión La mayor adhesión a la VM protectora en los pacientes con C-ARDS fue secundaria a la mayor adhesión a limitación da PD. Además, una menor PD se asoció de forma independiente a menor mortalidad en la UCI, lo que sugiere que limitar la exposición a altas PD puede mejorar la supervivencia en estos pacientes (AU)

Impacts of a fraction of inspired oxygen adjustment protocol in COVID-19 patients under mechanical ventilation: A prospective cohort study / Impactos de un protocolo de ajuste de la fracción de oxígeno inspirado en pacientes con COVID-19 sometidos a ventilación mecánica: un estudio de cohorte prospectivo

Objective We examined weather a protocol for fraction of inspired oxygen (FiO2) adjustment can reduce hyperoxemia and excess oxygen use in COVID-19 patients mechanically ventilated. Design Prospective cohort study. Settin Two intensive care units (ICUs) dedicated to COVID-19 patients in Brazil. Patients Consecutive patients with COVID-19 mechanically ventilated. Interventions One ICU followed a FiO2 adjustment protocol based on SpO2 (conservative-oxygen ICU) and the other, which did not follow the protocol, constituted the control ICU. Main variables of interest Prevalence of hyperoxemia (PaO2>100mmHg) on day 1, sustained hyperoxemia (present on days 1 and 2), and excess oxygen use (FiO2>0.6 in patients with hyperoxemia) were compared between the two ICUs. Results Eighty two patients from the conservative-oxygen ICU and 145 from the control ICU were included. The conservative-oxygen ICU presented lower prevalence of hyperoxemia on day 1 (40.2% vs. 75.9%, p<0.001) and of sustained hyperoxemia (12.2% vs. 49.6%, p<0.001). Excess oxygen use was less frequent in the conservative-oxygen ICU on day 1 (18.3% vs. 52.4%, p<0.001). Being admitted in the control ICU was independently associated with hyperoxemia and excess oxygen use. Multivariable analyses found no independent relationship between day 1 hyperoxemia, sustained hyperoxemia, or excess FiO2 use and adverse clinical outcomes. Conclusions Following FiO2 protocol was associated with lower hyperoxemia and less excess oxygen use. Although those results were not associated with better clinical outcomes, adopting FiO2 protocol may be useful in a scenario of depleted oxygen resources, as was seen during the COVID-19 pandemic (AU)

Objetivo Evaluar si un protocolo para el ajuste de la FiO2 reduce la hiperoxemia y el uso excesivo de oxígeno en pacientes con COVID-19 en ventilación mecánica. Diseño Estudio de cohorte prospectivo. Ámbito Unidades de cuidados intensivos (UCI) dedicadas a pacientes con COVID-19 en Brasil. Pacientes Pacientes con COVID-19. Intervenciones Una UCI siguió un protocolo de ajuste de FiO2 basado en SpO2 (UCI de oxigenoterapia conservadora, N=82) y la otra no siguió el protocolo (UCI control, N=145). Principales variables de interés Prevalencia de hiperoxemia (PaO2>100mmHg) en el día 1, hiperoxemia sostenida (presente en los días 1 y 2) y exceso de uso de oxígeno (FiO2>0,6 en pacientes con hiperoxemia) entre las 2 UCI. Resultados La UCI de oxigenoterapia conservadora presentó menor prevalencia de hiperoxemia en el día 1 (40,2 vs. 75,9%; p<0,001) y de hiperoxemia sostenida (12,2 vs. 49,6%; p<0,001). El uso excesivo de oxígeno fue menos frecuente en la UCI de oxigenoterapia conservadora el día 1 (18,3 vs. 52,4%; p<0,001). El ingreso en la UCI control se asoció de forma independiente con la hiperoxemia y el uso excesivo de oxígeno. Los análisis multivariables no encontraron una relación independiente entre hiperoxemia o uso excesivo de FiO2 y resultados clínicos adversos. Conclusiones Seguir el protocolo de FiO2 se asoció con menor hiperoxemia y menor consumo de oxígeno en exceso. Aunque esos resultados no se asociaron con mejores resultados clínicos, la adopción del protocolo FiO2 puede ser útil en un escenario de recursos de oxígeno agotados, como se vio durante la pandemia de COVID-19 (AU)

Adherence to protective mechanical ventilation in COVID-19 versus non-COVID-19-associated acute respiratory distress syndrome: Comparison between two prospective cohorts.

OBJECTIVE: To compare adherence to protective mechanical ventilation (MV) parameters in patients with acute respiratory distress syndrome (ARDS) caused by COVID-19 with patients with ARDS from other etiologies. DESIGN: Multiple prospective cohort study. SETTING: Two Brazilian cohorts of ARDS patients were evaluated. One with COVID-19 patients admitted to two Brazilian intensive care units (ICUs) in 2020 and 2021 (C-ARDS, n=282), the other with ARDS-patients from other etiologies admitted to 37 Brazilian ICUs in 2016 (NC-ARDS, n=120). PATIENTS: ARDS patients under MV. INTERVENTIONS: None. MAIN VARIABLES OF INTEREST: Adherence to protective MV (tidal volume ≤8mL/kg PBW; plateau pressure ≤30cmH2O; and driving pressure ≤15cmH2O), adherence to each individual component of the protective MV, and the association between protective MV and mortality. RESULTS: Adherence to protective MV was higher in C-ARDS than in NC-ARDS patients (65.8% vs. 50.0%, p=0.005), mainly due to a higher adherence to driving pressure ≤15cmH2O (75.0% vs. 62.4%, p=0.02). Multivariable logistic regression showed that the C-ARDS cohort was independently associated with adherence to protective MV. Among the components of the protective MV, only limiting driving pressure was independently associated with lower ICU mortality. CONCLUSIONS: Higher adherence to protective MV in patients with C-ARDS was secondary to higher adherence to limiting driving pressure. Additionally, lower driving pressure was independently associated with lower ICU mortality, which suggests that limiting exposure to driving pressure may improve survival in these patients.

Impacts of a fraction of inspired oxygen adjustment protocol in COVID-19 patients under mechanical ventilation: A prospective cohort study.

OBJECTIVE: We examined weather a protocol for fraction of inspired oxygen (FiO2) adjustment can reduce hyperoxemia and excess oxygen use in COVID-19 patients mechanically ventilated. DESIGN: Prospective cohort study. SETTING: Two intensive care units (ICUs) dedicated to COVID-19 patients in Brazil. PATIENTS: Consecutive patients with COVID-19 mechanically ventilated. INTERVENTIONS: One ICU followed a FiO2 adjustment protocol based on SpO2 (conservative-oxygen ICU) and the other, which did not follow the protocol, constituted the control ICU. MAIN VARIABLES OF INTEREST: Prevalence of hyperoxemia (PaO2>100mmHg) on day 1, sustained hyperoxemia (present on days 1 and 2), and excess oxygen use (FiO2>0.6 in patients with hyperoxemia) were compared between the two ICUs. RESULTS: Eighty two patients from the conservative-oxygen ICU and 145 from the control ICU were included. The conservative-oxygen ICU presented lower prevalence of hyperoxemia on day 1 (40.2% vs. 75.9%, p<0.001) and of sustained hyperoxemia (12.2% vs. 49.6%, p<0.001). Excess oxygen use was less frequent in the conservative-oxygen ICU on day 1 (18.3% vs. 52.4%, p<0.001). Being admitted in the control ICU was independently associated with hyperoxemia and excess oxygen use. Multivariable analyses found no independent relationship between day 1 hyperoxemia, sustained hyperoxemia, or excess FiO2 use and adverse clinical outcomes. CONCLUSIONS: Following FiO2 protocol was associated with lower hyperoxemia and less excess oxygen use. Although those results were not associated with better clinical outcomes, adopting FiO2 protocol may be useful in a scenario of depleted oxygen resources, as was seen during the COVID-19 pandemic.

Impacts of a fraction of inspired oxygen adjustment protocol in COVID-19 patients under mechanical ventilation: A prospective cohort study.

Objective: We examined weather a protocol for fraction of inspired oxygen (FiO2) adjustment can reduce hyperoxemia and excess oxygen use in COVID-19 patients mechanically ventilated. Design: Prospective cohort study. Setting: Two intensive care units (ICUs) dedicated to COVID-19 patients in Brazil. Patients: Consecutive patients with COVID-19 mechanically ventilated. Interventions: One ICU followed a FiO2 adjustment protocol based on SpO2 (conservative-oxygen ICU) and the other, which did not follow the protocol, constituted the control ICU. Main variables of interest: Prevalence of hyperoxemia (PaO2 >100 mmHg) on day 1, sustained hyperoxemia (present on days 1 and 2), and excess oxygen use (FiO2 > 0.6 in patients with hyperoxemia) were compared between the two ICUs. Results: Eighty two patients from the conservative-oxygen ICU and 145 from the control ICU were included. The conservative-oxygen ICU presented lower prevalence of hyperoxemia on day 1 (40.2% vs. 75.9%, p < 0.001) and of sustained hyperoxemia (12.2% vs. 49.6%, p < 0.001). Excess oxygen use was less frequent in the conservative-oxygen ICU on day 1 (18.3% vs. 52.4%, p < 0.001). Being admitted in the control ICU was independently associated with hyperoxemia and excess oxygen use. Multivariable analyses found no independent relationship between day 1 hyperoxemia, sustained hyperoxemia, or excess FiO2 use and adverse clinical outcomes. Conclusions: Following FiO2 protocol was associated with lower hyperoxemia and less excess oxygen use. Although those results were not associated with better clinical outcomes, adopting FiO2 protocol may be useful in a scenario of depleted oxygen resources, as was seen during the COVID-19 pandemic.

Objetivo: Evaluar si un protocolo para el ajuste de la FiO2 reduce la hiperoxemia y el uso excesivo de oxígeno en pacientes con COVID-19 en ventilación mecánica. Diseño: Estudio de cohorte prospectivo. Ámbito: Unidades de cuidados intensivos (UCI) dedicadas a pacientes con COVID-19 en Brasil. Pacientes: Pacientes con COVID-19. Intervenciones: Una UCI siguió un protocolo de ajuste de FiO2 basado en SpO2 (UCI de oxigenoterapia conservadora, N = 82) y la otra no siguió el protocolo (UCI control, N = 145). Principales variables de interés: Prevalencia de hiperoxemia (PaO2 > 100 mmHg) en el día 1, hiperoxemia sostenida (presente en los días 1 y 2) y exceso de uso de oxígeno (FiO2 > 0,6 en pacientes con hiperoxemia) entre las 2 UCI. Resultados: La UCI de oxigenoterapia conservadora presentó menor prevalencia de hiperoxemia en el día 1 (40,2 vs. 75,9%; p < 0,001) y de hiperoxemia sostenida (12,2 vs. 49,6%; p < 0,001). El uso excesivo de oxígeno fue menos frecuente en la UCI de oxigenoterapia conservadora el día 1 (18,3 vs. 52,4%; p < 0,001). El ingreso en la UCI control se asoció de forma independiente con la hiperoxemia y el uso excesivo de oxígeno. Los análisis multivariables no encontraron una relación independiente entre hiperoxemia o uso excesivo de FiO2 y resultados clínicos adversos. Conclusiones: Seguir el protocolo de FiO2 se asoció con menor hiperoxemia y menor consumo de oxígeno en exceso. Aunque esos resultados no se asociaron con mejores resultados clínicos, la adopción del protocolo FiO2 puede ser útil en un escenario de recursos de oxígeno agotados, como se vio durante la pandemia de COVID-19.

Molecular characterization and evaluation of virulence traits of Aeromonas spp. isolated from the tambaqui fish (Colossoma macropomum).

The present study was developed to characterize, at the species level, 34 strains of Aeromonas spp., previously isolated from stressed tambaqui fish (Colossoma macropomum), to elucidate virulence factors, as well as their antibiotic resistance profile. Amplification of the gyrB gene identified the strains as A. hydrophila, A. dhakensis, A. caviae, A. veronii and A. jandaei. Bacterial virulence was evaluated by enzymatic assays for phenotypical production of hemolysins, proteases and lipases followed by the search for genes codifying the enzymes ß-hemolysin, serine protease and lipase. Phenotypical production of virulence factors was diversified and proteolytic activity demonstrated to be a common expression among the strains. On the other hand, the lip gene encoding extracellular lipase was the most expressed. Furthermore, A. hydrophila was the most prevalent species isolated from tambaqui in our work.

Radiopacity and mechanical properties of dental adhesives with strontium hydroxyapatite nanofillers.

OBJECTIVES: Dental resins filled with hydroxyapatite (HAp) nanoparticles have significantly revolutionized restorative dentistry offering advantages such as remineralization potential and increase of polymerization. However, these materials have limited radiopacity hindering the diagnosis of secondary caries. The present study investigated the development of a new radiopaque dental adhesive by incorporating novel pure strontium hydroxyapatite nanoparticles [Sr10(PO4)6(OH)2, SrHAp] synthesized by a simple hydrothermal method. METHODS: Strontium phosphates were prepared using co-precipitation (SrHAp0h) and hydrothermal treatment for 2 and 5h (SrHAp2h and SrHAp5h). The crystallinity, crystallite size, textural and morphology features of the nanoparticles were characterized by XRD, FT-IR, micro-Raman and TEM. Strontium hydroxyapatite (SrHAp) or calcium hydroxyapatite (HAp) nanoparticles were then incorporated (10 wt%) into an adhesive resin of a commercial three-step etch-and-rinse adhesive to evaluate the radiopacity of disk-shaped specimens, degree of conversion (DC) assessed by FT-IR and mechanical properties by three-point bending test. The unfilled adhesive was used as negative control. RESULTS: While SrHAp0h and SrHAp2h resulted a phase mixing, the pure and highly crystalline phase of strontium hydroxyapatite free of calcium was obtained with 5h hydrothermal treatment (SrHAp5h). The TEM images revealed nanorods morphology for SrHAp5h. SrHAps incorporated into adhesive showed higher radiopacity, no alteration on DC despite slightly reducing the mechanical properties. SIGNIFICANCE: Although the mechanical properties are slightly impaired, incorporation of SrHAp nanoparticles offers potential method to improve radiopacity of restorative dental resins, easing the tracking of actual remineralization effects and enabling diagnosis of recurrent caries.

Novel hydroxyapatite nanorods improve anti-caries efficacy of enamel infiltrants.

OBJECTIVES: Enamel resin infiltrants are biomaterials able to treat enamel caries at early stages. Nevertheless, they cannot prevent further demineralization of mineral-depleted enamel. Therefore, the aim of this work was to synthesize and incorporate specific hydroxyapatite nanoparticles (HAps) into the resin infiltrant to overcome this issue. METHODS: HAps were prepared using a hydrothermal method (0h, 2h and 5h). The crystallinity, crystallite size and morphology of the nanoparticles were characterized through XRD, FT-IR and TEM. HAps were then incorporated (10wt%) into a light-curing co-monomer resin blend (control) to create different resin-based enamel infiltrants (HAp-0h, HAp-2h and HAp-5h), whose degree of conversion (DC) was assessed by FT-IR. Enamel caries lesions were first artificially created in extracted human molars and infiltrated using the tested resin infiltrants. Specimens were submitted to pH-cycling to simulate recurrent caries. Knoop microhardness of resin-infiltrated underlying and surrounding enamel was analyzed before and after pH challenge. RESULTS: Whilst HAp-0h resulted amorphous, HAp-2h and HAp-5h presented nanorod morphology and higher crystallinity. Resin infiltration doped with HAp-2h and HAp-5h caused higher enamel resistance against demineralization compared to control HAp-free and HAp-0h infiltration. The inclusion of more crystalline HAp nanorods (HAp-2h and HAp-5h) increased significantly (p<0.05) the DC. SIGNIFICANCE: Incorporation of more crystalline HAp nanorods into enamel resin infiltrants may be a feasible method to improve the overall performance in the prevention of recurrent demineralization (e.g. caries lesion) in resin-infiltrated enamel.

Thermodynamic analysis of fuels in gas phase: ethanol, gasoline and ethanol - gasoline predicted by DFT method.

This paper presents a theoretical study using density functional theory to calculate thermodynamics properties of major molecules compounds at gas phase of fuels like gasoline, ethanol, and gasoline-ethanol mixture in thermal equilibrium on temperature range up to 1500 K. We simulated a composition of gasoline mixture with ethanol for a thorough study of thermal energy, enthalpy, Gibbs free energy, entropy, heat capacity at constant pressure with respect to temperature in order to study the influence caused by ethanol as an additive to gasoline. We used semi-empirical computational methods as well in order to know the efficiency of other methods to simulate fuels through this methodology. In addition, the ethanol influence through the changes in percentage fractions of chemical energy released in combustion reaction and the variations on thermal properties for autoignition temperatures of fuels was analyzed. We verified how ethanol reduces the chemical energy released by gasoline combustion and how at low temperatures the gas phase fuels in thermal equilibrium have similar thermodynamic behavior. Theoretical results were compared with experimental data, when available, and showed agreement. Graphical Abstract Thermodynamic analysis of fuels in gas phase.

Physical activity in daily life assessed by an accelerometer in kidney transplant recipients and hemodialysis patients.

BACKGROUND: Sedentary lifestyle is a problem among hemodialysis (HD) patients, potentially attenuated after kidney transplantation. However, the effect of kidney transplantation on physical activity has not been thoroughly investigated. OBJECTIVE: This study sought to evaluate the physical activity in daily life in kidney transplant recipients (KTRs) compared with HD patients and to explore its relationship with clinical variables. METHODS: A cross-sectional study enrolled KTRs who received transplants at least 6 months before the study (N = 23; 48.3 ± 10.3 years) and patients undergoing HD for at least 6 months (N = 20; 47.3 ± 12.6 years). Time spent in different activities (walking, standing, sitting, and lying down) and number of steps taken, measured by a multiaxial accelerometer used for 12 h/d on 2 consecutive days for KTRs and on 4 consecutive days for HD patients, were evaluated. RESULTS: KTRs engaged in more active time per day (sum of walking and standing time) than HD patients (311 ± 87 vs 196 ± 54 min/d; P = .001), with longer walking (106 ± 53 vs 70 ± 27 min/d; P = .008) and standing time (205 ± 55 vs 126 ± 42 min/d; P < .001). Sixty-five percent of KTRs were classified as active (>7500 steps/d) compared with only 20% of the HD group (P < .05). The multivariate analysis showed that time posttransplantation was significantly associated with walking time and active time. CONCLUSIONS: By using an accelerometer, a precise method, this study showed that KTRs are significantly more active in daily life than HD patients, and that daily physical activity increases with time since transplantation.